Tsymo Pet Feeder Manual Pdf (2024)

FAQs

How much is one portion of Petlibro? ›

Instead of measuring in grams, teaspoons, or ounces, the Petlibro uses a product-specific portion system. One portion is equivalent to about 2.5 teaspoons of dry cat food. Depending on the caloric density of your cat's kibble, most adult cats will typically need 16 of these portions per day.

Press the Set button and the hour digit flashes, then press the - or + button and the Set button to set the hour and minute and select from "AM" or "PM." Then press the Set button to confirm and complete the time settings.

If green light is not flashing, you can press the setting button for 5 seconds to reset device.

Reset the feeder to factory settings, holding down the Add Pet ( ) button for 10 seconds (until the light starts alternating red / green and the lid opens and closes).

If the router or internet is not working, try resetting the router or contact your internet provider. Power cycle the feeder by turning off the power switch. Wait 10 seconds and turn the power switch back on. Check for other devices near the feeder that use the internet or other wireless signals (such as a microwave).

The USB adapter and battery backup ensure that even if there is a power outage, the feeder will continue to feed your pet, providing you with peace of mind when you're away.

Once the motion detector senses movement, the camera records and saves videos of your pets' activities. You'll even get alerts on your phone so you can watch in real time.

After determining how many calories per day your cat requires, then divide it by the number of meals they will get. For example, if you decide your cat needs ½ cup of food per day and want to use the feeder to feed four times per day, that is 1/8 of a cup per meal.

The Smart Pet Feeder can be reset by pressing and holding the 'feed' button for 5 seconds until a sound is heard. A reset will erase all settings and data on the Smart Pet Feeder and return it to its original factory settings.

NOTE: If the Link Indicator does not blink, press and hold the SET Button for five (5) seconds to reset the Pet Feeder.

How to hard reset petlibro feeder? ›

Press and hold the Up button and the Down button for three seconds to reset the feeder to factory settings.

THE FUNCTION DESCRIPTION Feed button: Short press to eat one, long press for 5 seconds to restore the factory settings.